Home > Products > Accessories

Mobile Power Pack Accessory Kit

Product #: AC4021-651
Label: 8520-00100

Shop US
Shop Other


Document:
Data Sheet, User Guide, Quick Start


Replacement or spare accessories for the Mobile Power Pack. Includes 6V Booster, 2.5mm barrel tip adapter, 3.5mm barrel tip adapter, 4.0mm barrel tip adapter, Palm charging adapter, iPod charging adapter, Retractable USB Cable, and Accessory carrying case.

 

 


Physical Characteristics

Weight: 312 g/11 oz L x W x H: 4 x 3 x 1 in (101.6 x 76.2 x 25.4 mm)

Battery Type: Rechargeable Lithium ion

Rated Capacity: 7,200 mAh Standard Charge/ Discharge

Nominal Capacity: 4.4 Ah @ 5 Volts

Recharge Time: Approx. 7 hours from a state of full discharge

Temperature Range: 0-60°C

Humidity Range: 45-75% rel. humidity

Cycle Life: >500 cycles (85%) under standard charging (5 volts @ 2 Amps) and discharging (5 Volts @ 500 mAh) conditions.

Charging Voltage/Input: +5 volts @ 3 Amps Max. Jack accepts a 4.0 x 1.65 mm DC power plug.

The Mobile Power Pack must connect to an electrical outlet via the A/C Charger. The A/C charger can remain connected for an indefinite period of time without overcharging or damaging the batteries. Contains integrated circuits that monitor voltage and tops-off the batteries as required by pulses of charging current.

Discharge Voltage/Output: +5 volts @ 1.8 Amps. Recessed jack accepts a USB Type A receptacle (any USB sync/charging cord can be used).

The Mobile Power Pack comes with monitoring circuits to indicate two discharge levels. The first level occurs when the battery is discharged to 85% — at this point, the yellow LED will blink. At the second trip point, the 5 volt output is disabled, and the output will discharge at a lower voltage until it falls to zero volts. For short circuits, or loads that cause a current drain in excess of 2 amps, the battery protection mechanism will respond and disconnect the units' output. To reset the Mobile Power Pack, you simply switch it from ON to OFF and back to ON. In the OFF state, all power is removed from the output. In the ON state, the power will restore all circuits to a connected status.

LED Indicators:

Included Accessories:

Regulatory Compliance: FCC, IC, ETL, CE


Home | Solutions | Partners | Product | Suppport
About Us | Investors | News | Events | Contact Us

 

Socket Communications, Inc.,
dba Socket Mobile, Inc. All rights reserved.