Socket Mobile-WW » Charging Stand

Charging Stand

Maximize barcode scanning efficiency and productivity with the charging Stand for the 700 Series and Series 7 barcode scanners. Designed to remain secure on any flat surface where you need to charge your scanner, while maintaining scanning function, as well. Scanners can charge and remain serviceable at the same time. Ideal for scanning customers’ mobile coupons and tickets on mobile devices. In addition, the ingenious design incorporates small magnets, aligning the charging stand and the scanners, helping to firmly secure the scanner to the Charging Stand, reducing accidental displacement while customers and employees continue to scan during charging phase.

USA (MSRP) EU (MSRP) Find a reseller Find a distributor


  • Supports Mobile Coupons* - Customers can scan their mobile coupons to redeem merchandise or present electronic coupons and tickets by passing their mobile devices under the barcode scanner.

  • Quick Release* - The Charging Stands quick release mechanism facilitates a seamless transition between Stand Mode and Mobile Mode.

  • Customers keep control of their devices* - The Charging Stand will enable customers to securely scan mobile coupons without relinquishing control of their mobile devices.

  • Charging - The Charging Stand contains contacts designed to match the 700 Series and Series 7 barcode scanners charging pins enabling the scanner to charge & operate under AC Power Supply when mounted in the Charging Stand. A light indicates power connection. An AC Power Supply with a USB cable is included.

  • Elegant & Functional - The Charging Stands' design was carefully chosen to match the 700 Series and Series 7 barcode scanner style of form and function.

  • Secure mounting - The Charging Stands' robust design is specifically engineered for secure mounting of the barcode scanner. A magnet embedded in the Charging Stand guides the 700 Series and Series 7 barcode scanner into alignment and holds it in place. 

  • Stationary with a twist - The Charging Stands' Mount uses a gimbal & socket to allow a 360 degree rotation and 3D tilt.

  • The Scanner Knows* - The Charging Stands' detection pins lets the barcode scanner know it is mounted on a Charging Stand. This facilitates a dynamic user environment when moving the scanner from the Charging Stand to the hand.

  • Smart SDK* - With the SDK your App can configure the CHS 7Qi, 7Xi and D750 scanner to generate a good scan light, beep tone, or vibrate indication when mounted in the Charging Stand and with a different good scan configuration when the scanner is Mobile/in your hand.  For the 7Qi, 7Xi and D750, your App can also configure Unattended Mode.

*With 7Qi, 7Xi and D750  2D barcode scanners only

Physical Characteristics


  • Charging Stand Height: 8.75 in (222 mm)

  • Charging Mount Width: 1.80 in (46 mm)

  • Charging Mount Length: 5.5 in (140 mm)
  • Base Diameter: 5.75 in (146 mm)

Total Mass:

  • Without Scanner and AC Power Supply: 16 oz (454 g)

  • With Scanner and without AC Power Supply: 17.6 oz (500 g)

Antimicrobial Rating:

  • JIS Z2801:2000 Test: 2.49 on MRSA 6.07 if cleaned with Sani-Cloth Plus cloth wipes

  • Biosafe HM4100, EPA# 83019-1

Included Items

  • Charging Stand in three pieces (Charging Mount, Base, Post), minor assembly required

  • 1A AC Power Supply (international plugs available)

  • 2m USB Charging Cable


  • 90 days


  • Complies with Part 15, FCC Rules

  • RoHS: Directive 2002/9S/EC


Key Features

  • Like our 700 Series and Series 7 barcode scanners, the Charging Stand was designed with aesthetics, ease-of-use, and performance. 

  • Easy to secure the Charging Stand to your counter top with a weighted base, magnets, and keyholes.  Gimbal and socket for easy set-up of the scanner.

  • Charges your 700 Series and Series 7 when not in use.

  • Charging Pins and Magnetic facilitate Grab’n’Go feature when the scanner is removed (to scan and/or go in-aisle to sell) and then reseated in the Charging Stand. (Applies to the CHS 7Qi, 7Xi and D750  scanners)

  • Lanyard can still be used with the Charging Stand.

  • The CHS 7Qi, 7Xi and D750 barcode scanners support Unattended Mode (Presentation Scan, AC Power Supply with Battery Charge, Good Scan Lights and Beep Indication, Vibrate Off) and then transition to Mobile Mode (Trigger Scan, Battery Power, user selected Lights/Beep/Vibrate good scan indications) when removed from the Charging Stand.

Hardware Features:

Charging Mount

  • Built-in hook and cradle to securely hold the scanner in place

  • Magnet ensures proper alignment for charging

  • Audible beep (adjustable) provides confirmation when the scanner is properly seated

  • Gimbal & socket with thumb-lock screw enable 360 rotation and front/back tilt

  • Lanyard can still be used with the Charging Stand


  • Rubber feet and a weighted base prevents sliding

  • Magnets to hold the Charging Stand on a metal surface

  • Keyholes to screw-mount the Charging Stand to a surface (option)


  • MicroUSB for connection to AC Power Supply (included)

  • Charging Stand light indicates power connection

  • Barcode scanner light indicates when it is fully charged (solid green)