SocketScan 700-Series

Models: S700, S730, S740

BT Addrs:> Located on the product label on the exterior of the scanner.

SN:Located in the battery compartment. Remove the battery door using a #2 Phillips screw driver to loosen the screw and remove the door.

SocketScan 800-Series

Models: S800, S840, S850, S860

SN and BT Addrs: Located on product label on the exterior of the scanner. For the BT Addrs, omit the colon characters. Characters are limited to 0 thru 9, and A thru F (not case sensitive).

DuraScan 600-Series & 700-Series

Models: D600, D700, D730, D740, D750, D760, D790

SN:Located on product label on the exterior of the scanner.

BT Addrs:Not shown on the product label. However, setting up and registering your scanner via the Socket Mobile Companion App soon after purchase will capture this info within the app and make it available should you need to request a replacement scanner.

CHS 7-Series scanners

Models 7Ci, 7Di, 7Mi, 7Pi, 7Qi,7Xi

SN:located in the battery compartment above the battery

BT Addrs:May be located on the product label above the battery or on the label beneath the battery. Omit the colon characters. Characters are limited to 0 thru 9, and A thru F (not case sensitive).

Removing battery door:Unlock and remove the battery door by using a thin coin to turn the lock (1/2” slotted round piece) under the scanner to a horizontal position (turn 90 degrees to orientate the slot side to side) and remove the door.